WARNING: A02 200 Power Supply is not sterile and can not be sterilized.

WARNING: In countries where the mains voltage is not 220-240 V, use a voltage converter.

WARNING: All staff who is going to use the product (doctors and assistants who will perform the surgical operation, bioengineer, etc.) should have the knowledge about surgical power tools.

1. Place A02 200 Power Supply on the appropriate / flat / dry ground sufficient distance according to the operation type, insert the power cable as appropriate 220 Volts into the slot on the back of the unit.

WARNING: Do not use the product if it has any noticeable damage and please contact us.
CAUTION: Make sure the handpiece is connected to the power supply before operating the device.

2. Turn on the device by pressing the On / Off button on the front of the console.

3. Hold the A03 300 Data Cable with the red dot on the connector facing up.

CAUTION: Hold the A03 300 Data Cable from connector part when you are fixing; otherwise Data Cable will be damaged.

4. Due to the risk of injury, firstly put the device in a safe (center) position.
5. First of all provide connection between A03 300 Data Cable and A02 200 Power Supply. Fix it as all red points are aligned. Be sure to hear the ”Click ” sound.

6. Fix the free end of A03 200 Data Cable to the bottom of the handpiece as same as data cable. Be sure to hear the ”Click ” sound.

CAUTION: Do not unplug your product by pulling the power cord.
CAUTION: Hold the A03 300 Data Cable while connecting it. Otherwise, the cable will be damaged.